product info
  NAME
HGK Series DC Solid State Relay
  DOWNLOAD PDF
  PRODUCT TYPE
Relay
    Solid State Relay
  MODEL
HGK-D06 10 D
description
FEATURES :
  • MOSFET output
  • Low On-state resistance
  • Input signal is compatible with TTL and CMOS
  • INternal RC snubber.
  • Input and output light isolated .
  • LED indicating operation
  • With safety cover,panel mount
  • 100% tested at rating current,CE conpliant .
    • Application :
    　　 HGK DC Series Solid State Relays, adapting ignition-proof engineering cover, unique sculpt, original architecture, screw thread connection with safety cover have the features of hard structure, vibration-proof capability high, input driving current small convenient to interface with terminals of computer and various digital tele-control circuit. This products are widely used in the fields of petrochemical equipment, foodstuff-producing mechanism, packaging machines, textile and plastic, mechanisms, tool numerical control, gymnasium equip. Specialities be the same with canker, aquosity request prevent explode scurvines circumstance, and often switch of occasion .

    PRECAUTIONS :
  • Heatsink should be used when the current is up to 5 Amperes, and heat-conductive silicate should be spreaded between the heatsink and the base.
  • When controlling inductive load, the SSR may be damaged by the high transient voltage and surge current added on the output, so some special clamping devices to control voltage, such as zener diode, varistor(MOV).
  • When controlling a small current(close to Min. Load current), a dummy load resistance should b e parallelled to reduce the rest higher voltage produced by the leakage current on the outpu t
  • To avoid the temperature exceeding the allowance, heatsink efficiency and the mounting positio n should be regarded, suitable space will be left when two or more SSR are mounted .
  • The output end must not be used in parallel to enlarge the current, however can be used in series for higher suitable operating voltage.
  • The input end can be used either mean when sharing a control power supply.
  • Please contact HALON application engineering department for additional information and specific
    application questions.
    • SELECTING CODE :
    General parameters :
    		 
    Dielectric strength 50Hz,1min 2500V input to output 4000V input,output to base
    Min.insulation resistacne 1000MQ@ 500VDC
    ax.Cpacitance input/output 50pF
    Ambient operating temperature 30℃ to 80℃
    Ambient storage temperature -40V to 125℃
    Weight(typical) 65g
    Input parameters :
    		 
    Control voltage range 3.5-362VDC
    Max.turn-on voltage 3.5VDC
    Min.turn- off voltage 1VDC
    Typical input current 1.8mA@5VDC 29mA@32VDC
    Output parameters(T=25℃) :
    		 
    Operating voltage range 0-500VDC
    Max.load current (with heatsink) 60ADC
    Min.load current 20 mADC
    Mac.surge current 240 ADC@10msec
    Max.on-state voltage drop@rated current 0.038Ohms
    Thermal resistance junction to case 0.56℃/w
    Off-state leakage current@rated voltage 0.3 mA
    Turn ontime 100 usec
    Turn off time 1.0 msec
    Dimensions :
     
    CONNECTION :