product info
  NAME
AD Justable Solid State Relay
  DOWNLOAD PDF
  PRODUCT TYPE
Relay
    Solid State Relay
  MODEL
PN-10SA
PN-25SA
PN-40SA
description
Application :
  • High rellability by S.M.T & TQC.(Surface Mounting Technology)
  • High Isolation over than 50MQ/500VDC
  • High dielectric over than 2.5KV
  • Low enable current less than 7.5mA/12VDC CMOSIC or TTL Compatible.
  • Low EMI/EFI& surge by Zeero cross Trigger Method.
  • High surge current duration,over 10 Times of rated current/one cycle.
  • High surge voltage duration by snubber circuit.
    • Guiding of Model :
    Control Method :
    Zero Cross Trigger Method
    Output TURN ON or TURN OFF only on zero cross point of sine wave,may avoid surge or EMI/RFI occurring.
    Specially suited to control resistive,capacitive and Non-saturated inductive loads
    Variable resistance control method
    Power output is controlled by the trigger angle of triac with variable resister 250KQ/110VAC,500KQ/220VAC
    Application Hints : 　　　　　　　　
    Input
    		NPN Output NO
    Input
    		NPN Output NO
    Input
    		NPN Output NO
    Input
    		NPN Output NO
    Input
    		NPN Output NO
    Input
    		NPN Output NO
    Type
    Standard type
    Model
    PN-10SA
    PN-25SA
    PN-40SA
    Rated load current
    10A
    25A
    40A
    Variable resistance
    Trimmer/250 to 110V, 500K to 220V, M to 380V
    Control method
    Phase control
    Operating voltage
    24-380VAC
    Min. black voltage
    600VAC
    Voltage drop
    1.6V/25℃
    Max. durated current
    135A
    275A
    410A
    Leakage current
    5.0mA
    5.0mA
    5.0mA
    Response time
    1ms
    Dielectric strength
    Over 2.5KVAC/ 1min.
    Isolation strength
    Over 50M/500VDC
    Operating temperature
    -20℃~+80℃
    Housing Material
    Intensive ABS
    Weight
    105G
    Dimension and connection diagram :