product info
  NAME
High Current DC-DC Solid State Relay
  DOWNLOAD PDF
  PRODUCT TYPE
Relay
    Solid State Relay
  MODEL
PN-10DD
PN-25DD
PN-40DD
PN-05DD
description
Application :
  • High rellability by S.M.T & TQC.(Surface Mounting Technology)
  • High Isolation over than 50MQ/500VDC
  • High dielectric over than 2.5KV
  • Low enable current less than 7.5mA/12VDC CMOSIC or TTL Compatible.
  • Low EMI/EFI& surge by Zeero cross Trigger Method.
  • High surge current duration,over 10 Times of rated current/one cycle.
  • High surge voltage duration by snubber circuit.
    • Guiding of Model :
    Control Method :
    Zero Cross Trigger Method
    Output TURN ON or TURN OFF only on zero cross point of sine wave,may avoid surge or EMI/RFI occurring.
    Specially suited to control resistive,capacitive and Non-saturated inductive loads
    Variable resistance control method
    Power output is controlled by the trigger angle of triac with variable resister 250KQ/110VAC,500KQ/220VAC
    Application Hints : 　　　　　　　　
    Input
    		NPN Output NO
    Input
    		NPN Output NO
    Input
    		NPN Output NO
    Input
    		NPN Output NO
    Input
    		NPN Output NO
    Input
    		NPN Output NO
    Type
    Standard type
    PCB type
    Model
    PN-10DD
    PN-25DD
    PN-40DD
    PN-05DD
    Rated load current
    10A
    25A
    40A
    5A
    Input voltage
    3-32VDC
    Min. on/off voltage
    ON>2.4V, OFF<1.0V
    Trigger current
    7.5mA/12V
    Control method
    Isolated by photocouple
    Operating voltage
    5-110VDC
    5-110VDC
    Min. black voltage
    500VDC
    Voltage drop
    1.0V/25℃
    Max. durated current
    30A
    75A
    120A
    30A
    Leakage current
    ≤ 0.8mA
    Response time
    1ms
    Dielectric strength
    Over 2.5KVAC/ 1min.
    Isolation strength
    Over 50M/500VDC
    Operating temperature
    -20℃~+80℃
    Housing Material
    Intensive ABS
    Weight
    105G
    Dimension and connection diagram :